Deluxe IH Series – ECXIH

Description

Our cone tapered ground set aluminum flagpoles are precision fabricated from new, 6063-T6 tubing
utilizing the industry’s most sophisticated manufacturing processes. The conical portion tapers
approximately 1″ in every 5-1/2 feet.
All anodized flagpole shafts are highly polished with fine grain aluminum oxide cloth resulting in a
high quality, deep satin lustre finish. This finish represents the ultimate in architectural finishes for
aluminum flagpoles. The elegant, soft sheen remains maintenance free.

These Deluxe IH (internal halyard) Series flagpoles contain a winch mounted inside the flagpole shaft,
operable only with a removable crank handle. As the stainless steel cable unwinds
from the winch, it passes up through the inside of the flagpole shaft, over the truck
sheave to the outside of the shaft, where the retainer ring provides a sliding anchor. A
counterweight, heavily coated with neoprene, attached to the retainer ring, allows the
halyard to be lowered for fastening or removing the flag. The winch is gearless and
self-locking at any point, eliminating the need for a separate brake. This direct drive
winch provides rapid raising and lowering of the flag with little effort. This design does
not require any welding, thus avoiding discoloration when an anodized finish is desired.
No monthly lubrication is needed and this winch system is easily adaptable to existing
on-site flagpoles.

LIMITED MANUFACTURER’S LIFETIME WARRANTY